Home / Shop
Flexeon LP-350 Reverse Osmosis System Pump-less
- Description
Flexeon LP-350 Reverse Osmosis System Pump-less
The Flexeon LP-350 Reverse Osmosis System is designed to treat 350 gallons per day. This system requirs a minimum of 70psi of incoming water pressure and a maximum TDS of 250ppm. The pump-less LP-Series provides lower optierational costs and is easy to install and maintain. Upgraded cover with pressure gauges and a 20" floor stand also available. The Flexeon LP-350 Reverse Osmosis System is designed for pump-less light commercial applications up to 350 gallons per day (at a line pressure of 70 psi and max TDS of 250ppm). System comes ready for immediate on-line service, minimal set up and little adjustment. The simple, high quality and proven design of Flexeon RO Systems have made these systems become known as turn-key, cost effective and reliable water purification systems.
Product Specifications
DESIGN | LP-350 |
Configuration | Single Pass |
Feed Water Source (ppm) | TDS <250 |
Standard Recovery | 40% |
Rejection and Flow Rates | |
Nominal Salt Rejection | 96% |
Nominal Product Water Flow | 0.25 / 0.95 |
Nominal Waste Water Flow(gpm/lpm) | 0.38 / 1.43 |
Connections | |
Feed (in) | 3/8 Tube |
Permeate (in) | 3/8 Tube |
Concentrate (in) | 3/8 Tube |
Membranes | |
Membrane Per Vessel | 1 |
Membrane Quantity | 1 |
Membrane Size | 3012 |
Vessels | |
Vessel Array | 1 |
Vessel Quantity | 1 |
System Dimensions | |
L X W X H ( in/cm) | 17 x 7.5 x 29 / 43.2 x 19 x 122.7 |
Weight (lb/kg) | 35 / 15.8 |
*Product flow and recovery rates are based on feed conditions of 50 TDS at 77◦F at 70 psi. Treatment ability of the RO system is dependent on feedwater quality and feed pressure. Higher TDS and/or lower temperatures and/or pressure will reduce product flow.
|
|
Operating Limits
Design Temperature | 77◦F | Max. Turbidity NTU | 1 |
Max. Feed Temperature | 85◦F | Max. Free Chlorine ppm | 0 |
Max. Feed Temperature | 50◦F | Max. TDS ppm | 250 |
Max. Ambient Temperature | 120◦F | Max. Hardness GPG | 1 |
Min. Ambient Temperature | 40◦F | Max. pH (Continuous) | 11 |
Max. Pump Inlet Pressure psi | 85 | Min. pH (continuous) | 3 |
Min. Pump Inlet Pressure psi | 45 | Max.pH (Cleaning 30 min.) | 12 |
Max. SDI Rating | <1 | Min. pH (Cleaning 30 Min.) | 2 |
Standard Features
- Pentek 20’’ Slim Line Housings
- AXEON TF 3012-500 Line Pressure RO Membrane Element
- AXEON 3012 Membrane Housing
- John Guest Push/ Pull Fitting with Locking Safety Clips
- 3/8 Automatic Shut Off Valve
- External Storage Tank Port
Options and Upgrades
- 20’’ Floor Stand
- HM Digital DM-2 TDS Meter
- Cover with AXEON Glycerin-Filled Pressure Gauges Including:
- Post- Filter Pressure Gauge
- Operational Pressure Gauge
- Permeate Pressure Gauge
- Cover without Pressure Gauges