Home / Shop
- Description
FLEXEON LC-750 Reverse Osmosis System
LC-Series Reverse Osmosis Systems FLEXEON LC-Series Reverse Osmosis Systems are manufactured for light commercial applications and feature a compact space-saving design. The versatile design allows for either wall-mounted or free-standing operation. The LC-Series Systems comes pre-assembled, and ready for immediate on-line service with minimal set up and simple utility connections. FLEXEON LC-Series Reverse Osmosis Systems have been engineered for capacities ranging from 750 to 1,500 gallons per day, and feature a Fluid-O-Tech Low Lead Brass Rotary Vane pump designed for enhanced performance. Standard Features- White Powder Coated Steel Bracket
- 10 Micron Carbon Block Pre-Filter ( on LC-750)
- AXEON by Pentek Housings
- Fluid-O-Tech Low Lead Brass Rotary Vane High Pressure Pump
- ODP High Efficiency Carbonator Motor
- AXEON HF5-Series Ultra Low Energy Membranes
- Permeate Flow Meter
- Concentrate Flow Meter
- Concentrate Recycle Flow Meter
- Feed Solenoid Valve
- 316 Stainless Steel Concentrate and Recycle Valves
- 0- 300 psi Pump Pressure Gauge
- 0- 100 psi Post-Filter Pressure Gauge
- 0- 100 psi Permeate Pressure Gauge
- John Guest Push/Pull Fittings with Locking Safety Clips
- Low Pressure Switch for Pump Protection
- Permeate High Pressure Switch
- HM Digital DM-2 TDS Meter
- 20’’
- Storage Tanks
- Fluid-O-Tech Stainless Steel Rotary Vane Pump
- Blending Valve
Product Specifications
DESIGN | LC-750 | |||||||||||||||||||||||||||||||||||
Configuration | Single Pass | |||||||||||||||||||||||||||||||||||
Feed Water Source (ppm) | TDS up to 1,000 | |||||||||||||||||||||||||||||||||||
Standard Recovery | Up to 75% | |||||||||||||||||||||||||||||||||||
Rejection and Flow Rates | ||||||||||||||||||||||||||||||||||||
Nominal Salt Rejection | 98.5% | |||||||||||||||||||||||||||||||||||
Permeate Flow Rate | 0.52 gpm | |||||||||||||||||||||||||||||||||||
Concentrate Flow Rate ( min.) | 1.7 gpm ( 6.4) lpm) | |||||||||||||||||||||||||||||||||||
Concentrate Recycle Flow Rate | 1.4 gpm (5.2 lpm) | |||||||||||||||||||||||||||||||||||
Connections | ||||||||||||||||||||||||||||||||||||
Feed (in) | 3/8 QC | |||||||||||||||||||||||||||||||||||
Permeate (in) | 3/8 QC | |||||||||||||||||||||||||||||||||||
Concentrate (in) | 3/8 QC | |||||||||||||||||||||||||||||||||||
Membranes | ||||||||||||||||||||||||||||||||||||
Membrane Per Vessel | 1 | |||||||||||||||||||||||||||||||||||
Membrane Quantity | 1 | |||||||||||||||||||||||||||||||||||
Membrane Size | 3018 | |||||||||||||||||||||||||||||||||||
Vessels | ||||||||||||||||||||||||||||||||||||
Vessel Array | 1 | |||||||||||||||||||||||||||||||||||
Vessel Quantity | 1 | |||||||||||||||||||||||||||||||||||
Pumps | ||||||||||||||||||||||||||||||||||||
Pump Type | Rotary Vane 401 Low Lead Brass | |||||||||||||||||||||||||||||||||||
Motor ( HP) | 1/3 HP | |||||||||||||||||||||||||||||||||||
RPM@ 60 HZ | 1725 | |||||||||||||||||||||||||||||||||||
Electrical | ||||||||||||||||||||||||||||||||||||
Standard Voltage | 110 V, 1PH ,60 HZ | |||||||||||||||||||||||||||||||||||
System Dimensions | ||||||||||||||||||||||||||||||||||||
*Approx. Dimensions L X W X H ( in/cm) | 17 x 7.5 x 29 ( 43.18 x 19.05 x 73.66) | |||||||||||||||||||||||||||||||||||
*Approx. Weight (lb/kg) | 50( 22.68) | |||||||||||||||||||||||||||||||||||
*Product flow and recovery rates are based on feed conditions of 1000 ppm TDS at 77◦.Treatment ability of the RO System is dependent on feed water quality. Higher TDS and/or lower temperatures will reduce product flow. Performance projections should be run for each installation.Operating Limits
|
||||||||||||||||||||||||||||||||||||